9/30/2010

Nuclear safety systems

There are 3 primary objectives of Nuclear Safety Systems which are:
  • to shutdown the reactor
  • maintain it in a shutdown condition
  • prevent the release of radioactive material during events and accidents
One of the safety system implemented is the Reactor Protection System. It is composed of systems which are designed to immediately terminate the nuclear reaction. While the reactor is operating, the nuclear reaction continues to produce heat and radiation. By breaking the chain reaction the source of heat can be eliminated and other systems can then be used to continue to cool down the core. All plants must have some kind of these systems.

Another important system is the Emergency Core Cooling System (ECCS). The system comprises a series of systems which are designed to safely shut down a nuclear reactor during accident conditions. These systems allow the plant to respond to a variety of accident conditions and at the same time creates redundancy so that the plant can still be shutdown even if one or more of the systems fails to function.

Under normal conditions, nuclear power plants receive power from off-site. However, during an accident a plant may lose access to this power supply and thus may be required to generate its own power to supply its emergency systems. These electrical systems usually consist of diesel generators and batteries.

There's a containment systems are designed to prevent the release of radioactive material into the environment. It includes fuel cladding, reactor vessel and primary and secondary containment.

In case of a radioactive release, most plants have a system designed to remove radiation from the air to reduce the effects of the radiation release on the employees and public. This system usually consists of containment ventilation and control room ventilation.

reference: www.ask.com/wiki/Emergency_Core_Cooling_System

6 comments:

  1. ECCS consists of the Advanced Accumulator system, High-head Injection system, and Emergency Letdown system.

    1) The Advanced Accumulator system

    The advanced accumulator automatically injects borated water into the cold leg in the initial stage of postulated accident. The Advanced Accumulator has 2 stages flow rate design; a large initial flow rate for immediate vessel refill, and a small flow rate for core re-flood.

    This system is passive.

    2)The High-head Injection system

    The safety injection pumps (SIPs) provide borated water into the reactor vessel directly via Direct Vessel Injection nozzle from the RWSP in Core re-flooding and long term cooling).

    Conventional low-head injection system is eliminated by using combined performance of the Advanced Accumulator system and the High-head Injection system.

    3)The Emergency Letdown system

    The emergency letdown system (ELS) consists of emergency letdown lines from the RCS hot legs to the refueling water storage pit (RWSP).

    ReplyDelete
  2. Superb site you have here but I was curious if you knew
    of any forums that cover the same topics discussed here? I'd really like to be a part of group
    where I can get feedback from other experienced people that
    share the same interest. If you have any suggestions, please let me know.
    Thanks a lot!

    Take a look at my web site :: weight loss pill garcinia cambogia

    ReplyDelete
  3. Aw, this was an incredibly nice post. Taking a few minutes and actual effort to produce
    a very good article… but what can I say… I procrastinate a lot
    and never seem to get anything done.

    ReplyDelete
  4. Attractive section of content. I just stumbled upon your blog and in accession capital
    to assert that I get in fact enjoyed account your blog posts.
    Anyway I will be subscribing to your augment and even I
    achievement you access consistently rapidly.

    Also visit my site - small business [team.marketkits.com]

    ReplyDelete
  5. Great post.

    Also visit my web blog :: diets (www.w3ightl055.com)

    ReplyDelete